Optimized for 3D-printed veneers, EnVision achieves a minimum printable thickness of as little as 0.2 mm, allowing clinicians to deliver esthetic enhancements while preserving natural tooth structure. This breakthrough in material design expands the potential for no-prep and minimally invasive veneers without compromising on strength or beauty.
Pac-Dent is able to uniquely offer a complete end-to-end veneer system from initial production to final placement of veneer. With EnVision resin developed alongside Rodin Bond and Veneer Cement, every element of the restorative process works with verified compatibility, giving clinicians unparalleled confidence in strength, esthetics, and predictability.
EnVision Kit
$ 1,469
EnVision Veneer Resin,
600g Bottle
$ 749.00
Veneer Cement,
3g Syringe
$ 99.00
1x EnVision Veneer Resin, Shade 0M1, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade 0M3, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade A1, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade B1, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade 0M1, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade 0M3, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade A1, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
1x EnVision Veneer Resin, Shade B1, 600g bottle
2x Try-in Gel, Clear, 3g syringe
2x Veneer Cement, Clear, 3g syringe
1x EtchPro Etching Gel, 3g syrnge
1x Rodin Bond Dental Adhesive, 5 ml bottle
50x Micro applicator Tips
50x 2-hole Mixing Wells
25x Pre-Bent Needle Tips
Refill Kits
Cement Refills
Proven Quality
Ultra Thin
Printability
Cohesive
Bonding System
Specialized
INdications
All-on-X
Denture Teeth
Veneers
EnVision delivers reliable structural integrity at just 0.2 mm thickness—far thinner than traditional ceramic hybrids or posterior‑grade printable resins. This ultra-thin capability makes it ideal for:
By comparison, OnX Tough 2 showed instability below 0.3 mm, increasing the risk of edge fractures and post-processing detachment.
Recommended for Printed Veneers
Enables ultra-thin printing with reliable 0.2 mm minimum thickness
Designed for no-prep and minimal-prep veneer workflows
Over 51% ceramic filler for esthetic translucency and durability
Available in 600 g bottle
4 Shades (OM1, OM3, A, B1)
Recommended for Permanent Crowns
Offers Best-in Class Strength and Wear Resistance
Designed for Long-Term Temporary and permanent fixed restorations
Over 60% ceramic filler: Zirconia-Infused
Available in 1.2 kg, 600 g & 300 g Bottle
18 Shades (Full Vita Classic Shade Range)
Recommended for Full Arch Restorations
Provides high impact resistance for demanding full-arch cases
Designed for All-on-X, full arch prosthetics, and denture tooth setups
Over 51% ceramic filler for enhanced strength and rigidity
Available in 1.2 kg, 600 g & 300 g bottle sizes
7 Shades (A1, A2, A3, C2, OM1, OM3)
Recommended for Same-Day Restorations
Prints up to 2× faster than traditional ceramic-filled resins
Designed for same-day crowns, denture tooth arches, and bridges
Over 51% ceramic filler for strength and esthetic performance
Available in 600 g & 300 g bottle
4 Shades (A1, A2, B1, OM3)
Rodin N₂‑Free Glaze is a light-curable universal sealant, adhesive, and chemical primer that strengthens all printed restorations—Drop glaze into denture base sockets before seating teeth, brush excess on cameo surface and cure.
Use Rodin Palette 2.0 with Pac‑Dent micro‑applicators to apply palette in layers, cure each and blend with glaze for richer color.
A final coat of Rodin N₂‑Free Glaze provides a durable “candy‑coat” finish that seals stains and add durable protection.
The final post‑curing process is vital as it fuses all layers of a 3D‑printed restorations into a monolithic premium printed denture
A universal bonding agent that enhances adhesion between the etched tooth surface and the veneer cement. It ensures long-lasting retention and improved bond strength.
A temporary gel that allows clinicians to test the veneer’s fit, shade, and overall aesthetics before final cementation. It mimics the optical properties of the final cement without bonding the veneer permanently.
A light-cure veneer cement designed to provide a strong and esthetic bond between the veneer and the tooth structure. The clear formulation ensures optimal translucency and a seamless blend with natural enamel.
A universal bonding agent that enhances adhesion between the etched tooth surface and the veneer cement. It ensures long-lasting retention and improved bond strength.
Small, disposable applicators used to precisely apply the bonding agent and etching gel without waste.
Small wells for dispensing and mixing bonding agents or cements before application, ensuring a controlled and hygienic workflow.
These curved dispensing tips allow for precise and controlled application of etching gel, bonding agent, and veneer cement, ensuring accuracy during placement.
A universal bonding agent that enhances adhesion between the etched tooth surface and the veneer cement. It ensures long-lasting retention and improved bond strength.
A temporary gel that allows clinicians to test the veneer’s fit, shade, and overall aesthetics before final cementation. It mimics the optical properties of the final cement without bonding the veneer permanently.
A light-cure veneer cement designed to provide a strong and esthetic bond between the veneer and the tooth structure. The clear formulation ensures optimal translucency and a seamless blend with natural enamel.
A universal bonding agent that enhances adhesion between the etched tooth surface and the veneer cement. It ensures long-lasting retention and improved bond strength.
Small, disposable applicators used to precisely apply the bonding agent and etching gel without waste.
Small wells for dispensing and mixing bonding agents or cements before application, ensuring a controlled and hygienic workflow.
These curved dispensing tips allow for precise and controlled application of etching gel, bonding agent, and veneer cement, ensuring accuracy during placement.
Evaluate that patient is a good candidate for non-prep veneers; and perform intraoral scan to capture patient’s dentition and occlusion.
Using CAD software to design veneers. Virtually assess gingival margins, incisal length, and occlusal clearance.
Export and nest digital veneer files onto printer build plate. Load EnVision print settings into compatible 3D printer; fill EnVision Resin into printer vat and print.
Carefully remove uncured resin with an alcohol-soaked toothbrush, remove part from build plate with a spatula to avoid damage.
Gently trial seat veneers, adjust if necessary. Stain & glaze intraorally with Palette 2.0 Stain & N2-Free Glaze; tack-cure with handheld curing light if needed.
Perform a final cure of the printed veneers in a post-curing unit to enhance strength and biocompatibility.
Using the restorative products in the EnVision Kit: Use Try-In to ensure shade and dimensions are accurate. Prepare tooth surface by applying EtchPro to bonding surface Apply a thin layer of Rodin Bond, air-dry and light-cure. Lastly, apply Veneer Cement onto intaglio surface and perform final light cure.